How do you remove a ceramic soap dish, without damaging the surrounding tiles? - ceramic soap
I delete the old, broken record, but I do not want to damage the surrounding tiles. Please help, thank you!
Sunday, January 17, 2010
Ceramic Soap How Do You Remove A Ceramic Soap Dish, Without Damaging The Surrounding Tiles?
Subscribe to:
Post Comments (Atom)
4 comments:
Hello. In general, two types of ceramic soap dish installed in the bathrooms of residence or business use. They have the same appearance of the THA, the difference is tied to the back wall. The man is what is called it a flush and was only on the board or drywall, glued, etc. The other is a kind was installed in a pre-cut hole in the wall surface was cemented in place with the same nozzle (recently), that fills the spaces between the tiles. In each case, first scrape all the joints around the perimeter of soap-box. You can simulate it with a knife or a screwdriver or a thin object to be used. Then you throw a hard rubber and start to touch the plate on all sides. (Protect your eyes with safety goggles!) In addition to protecting the edge of the tub and down to the possibility of itching of the tank would prevent the plate and the boundary. If the type is called Soap "and take", ie there must be a handle, and the owner can use a piece of soap, you take all the measures. Just go and be patient, because if it was installed,Act will remain good. If it's the type of coating, which undoubtedly have a big lump of mortar on the back and take a little longer. If it is you do not care, can hold the bowl and take a regular hammer and hit a few times to break in the middle of the back and possibly. It's like a cup of coffee, except thicker. Be careful! 1. Protect your eyes and hands. 2. Protect the surface of the tub. 3. Make sure that all joints around the unit clean so that the strike will not be transferred to the disruption of neighboring tiles. Good luck and I hope that helps.
a professional, will do it cheaper in the long
U can order a zip tool broke with the use of ceramic nozzle tip and cut around the table and then use the tool to cut the plate into pieces .... thats how my husband is tile ...
LIC. Gene. conractor
best way is to crack a small hammer and a few pieces, careful and clean as you remove it! Good luck!
Post a Comment